Model: NC603L
Contact Us or call for pricing: 866.771.0266
Designed for theaters with screens (up to 36 ft. wide), NEC's NC603L is the latest DCI compliant B Laser DLP cinema projector. Delivering precise 2K (2048 x 1080) resolution, 3-D capabilities and high contrast images (1650:1), this model is easy to operate, extremely user-friendly and requires minimal maintenance providing up to 50,000* hours of laser life for unsurpassed TCO. Designed to work with all Series2 Integrated Media Server (IMS).
  • 3D content utilizes the projector's full 2K resolution and triple flash technology for smooth motion
  • Lamp free projector uses an B laser module
  • Approximately 50,000* hours of expected usage of the laser and DMD (depends on environmental conditions)
  • Direct selection buttons for eight stored projector configurations
  • Auto brightness control maintains constant brightness by adjusting the laser power as it ages
  • Complete line of (4) bayonet-style lenses with electronic zoom, focus and lens shift
  • Memory functions for lens position and light output simplify frequent operation



Legal Disclaimer To California Residents
WARNING: This product can expose you to chemicals including Styrene and Formaldehyde (gas), which are known to the State of California to cause cancer, and Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov


Display

Native Resolution 2048x1080 Maximum Resolution 2K 2048 x 1080
Contrast Ratio (typical) 1650:1 Lifetime 2 years / 50,000* hours

Synchronization Range

Horizontal (Analog/Digital) 15-100kHz (RGB: 24kHz or over) Vertical 50-120Hz

Signal Compatibility/Connectivity

External Control 2 × RJ45 (4 GPI and 6 GPO); 3 × RJ45 Gigabit Ethernet Output Terminals
Monitor Out:
1x3D(D-sub 15pin female), 1xGPIO(D-sub 37pin female), 1xUSB(Type-A), 1xLAN(100Base-T, RJ45), 1xSERIAL(RS-232C, D-sub 9pin female)

Power Consumption (typical)

On 890W Input Current 7.4A
Power Requirements "200 – 240V AC, 50/60Hz Single Phase " Power Supply Voltage 200 - 240V AC, 50/60Hz Single Phase

Physical Specifications

Dimensions (WxHxD)
Product:
26.8 x 13.1 x 33.9 in. (680 x 333 x 860mm)
External:
26.8 x 13.1 x 33.9 in. (680 x 333 x 860mm)
Shipping:
47.4 x 24.7 32.3 in. (1205 x 626 x 821 mm)
Weight
Net Weight:
130 lbs. / 59 kg (excluding lens)
Shipping:
170 lbs. (77 kg)

Environmental Conditions

Operating Temperature 50°-96°F / 10°-35°C Operating Humidity 10 to 85% Humidity (Non-Condensing)
Operating Altitude 0 to 3000 m (9,800 ft) Storage Temperature 14°-122°F / -10°-50°C
Storage Humidity 10% - 85% (non-condensing) Storage Altitude 0-12,000m / 0-39,370ft (above sea level)

Limited Warranty (parts & labor)

Registered owners receive a 2-year parts and labor warranty  

Additional Features

Motorized focus, zoom, horizontal/vertical shift, light shutter (dowser) / Lens memory stores lens setting (shift/zoom/focus) / Range of shift is dependent on lens  

Optical

Light Output(Lumens) 6,000 Lumens Light Source Life 50,000* hours
Throw Ratio 1.2 to 1.72:1 zoom / 1.33 to 2.1:1 / 1.62 to 2.7:1 zoom / 2.09 to 3.9:1 zoom Projection Distance 2.9 - 35.9 ft. / 0.9 - 10.9 m
Projector Angle +/-15° (Up / Down) Lens
Zoom:
Motorized
Focus:
Motorized
F number, fnumber:
(NP-9LS12ZM1) F=2.5, f=18.6-26.7mm, (NP-9LS13ZM1) F=2.5, f=20.7-32.7mm, (NP-9LS16ZM1) F=2.5, f=25.2-42mm, (NP-9LS20ZM1) F=2.5, f=32.2-60.3mm

Mechanical

Installation Orientation Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear Fan Noise 39.0dB
Regulations
  • Safety: UL62368-1, EMC: FCC Part15 ClassA, Marking: cTUVus FCC
  • Safety: CAN/CSA C22.2 No. 62368-1:19 (3rd edition), EMC: ICES-003 Issue7, ClassA, Marking: cTUVus, CAN ICES-3(A)/NMB-3(A)
  • IEC62368-1, CISPR 22, CISPR 24, CISPR 32, CISPR 35 CLASS A
Optional Lenses Zoom lens 0.84-1.26 (NP-9LS08ZM1), Zoom lens 1.2-1.72 (NP-9LS12ZM1), Zoom lens 1.33-2.1 (NP-9LS13ZM1), Zoom lens 1.62-2.7 (NP-9LS16ZM1), Zoom lens 2.09-3.9 (NP-9LS20ZM1)

Accessories

Optional
  • Zoom lens 1.2-1.72 (NP-9LS12ZM1)
  • Zoom lens 1.33-2.1 (NP-9LS13ZM1)
  • Zoom lens 1.62-2.7 (NP-9LS16ZM1)
  • Zoom lens 2.09-3.9 (NP-9LS20ZM1)
 

Projection Method

3-chip DLP Cinema® Technology  

Primary Lenses

Zoom lens 0.84-1.26 (NP-9LS08ZM1), Zoom lens 1.2-1.72 (NP-9LS12ZM1), Zoom lens 1.33-2.1 (NP-9LS13ZM1), Zoom lens 1.62-2.7 (NP-9LS16ZM1), Zoom lens 2.09-3.9 (NP-9LS20ZM1)  

Lens Adjustment Functions

Motorized focus, zoom, horizontal/vertical shift, light shutter (dowser) / Lens memory stores lens setting (shift/zoom/focus) / Range of shift is dependent on lens  

Light Source

Laser Light Source  

Supported Screen Size (maximum)

Up to 36.1 ft. / 11m  

Cooling Method

Air and liquid cooling inside  

DMD Specifications

0.69” S2K DLP Cinema® Chip  

Notes

*** Subject to installation conditions. Maximum screen size is under the conditions of 14-ft-L @ screen gain 1.8
***** When the AC power to the projector power supply and the lamp power supply are provided by a single cable
 

Custom DMD shielding
Protects the projector from dust/oil contaminates and provides optimal picture quality.
Lens Shift
Vertical and horizontal lens shift enables flexible projector placement.
Motorized Zoom and Focus
Simplifies installation and operation by easily adjusting the lens through the remote control.
Dark Chip3 DLP® Technology
DLP chip set designed to provide maximum contrast.

SHARP/NEC Launches new NC603L and NC1503L Laser Projectors
Newest addition to Digital Cinema Projector Series offers RB Laser Phosphor technology for a speckle-free, high-quality image and no external chiller for easy, flexible installation

  • Important Information card, Service door key, Power cord stopper
Contact Sales Contact Support